UM1871 Datasheet, PDF (1/64 Pages) STMicroelectronics – Evaluation board with STM32F446ZE MCU

UM1871
User manual
Evaluation board with STM32F446ZE MCU
Introduction
The STM32446E-EVAL evaluation board has been designed as a complete demonstration
and development platform for the STMicroelectronics ARM^® Cortex^®-M4 with FPU core
based STM32F446ZET6 microcontroller with SPDIF input, four I²C buses, four SPI, three
I²S, two SAI ports, two CAN ports, three 12-bit ADC, two 12-bit DAC, up to 17 timers, USB
OTG HS and FS, camera interface, flexible memory controller (FMC), Quad-SPI interface,
SDIO interface, 512-Kbyte Flash memory and 128-Kbyte SRAM, JTAG debug and ETM
trace support.The full range of hardware features on the board can be used to evaluate all
peripherals (USB HS & FS, USART, IrDA, CAN, digital microphones, audio codec, ADC and
DAC, color LCD glass with touchscreen, SDRAM and Quad-SPI Flash memory, I²C
EEPROM, RF-EEPROM, microSD card) and develop user’s applications. Extension
headers allow to easily connect a daughterboard for specific applications. ST-LINK/V2-1
in-circuit debugger and programmer facility is integrated on the mainboard.
Figure 1. STM32446E-EVAL evaluation board
1. Picture not contractual.
October 2015
DocID027604 Rev 3
1/64
www.st.com
1