UM1756 Datasheet, PDF (1/49 Pages) STMicroelectronics – The EVAL6480H-DISC and EVAL6482H-DISC are low cost development tools based

UM1756
User manual
EVAL6480H-DISC and EVAL6482H-DISC: high power stepper
motor driver based on the L6480H/L6482H and STM32™
Introduction
The EVAL6480H-DISC and EVAL6482H-DISC are low cost development tools based on the
L648xH controllers and STM32™.
The EVAL6480H-DISC/EVAL6482H-DISC is an ideal starter-kit for both beginners and
experienced users, it is autonomous and can be used with a software interface, or it can be
used with custom firmware thanks to the embedded microcontroller with the 128 kB Flash
memory and 64 kB RAM.
Through the available GUI the user can easily set the full configuration of application
parameters.
They are “Plug and Play” tools suitable for high power solutions thanks to the wide operating
voltage range from 10.5 V to 85 V and the current capability up to 8 A_r.m.s.
Figure 1. EVAL6482H-DISC board photo
April 2015
DocID026263 Rev 2
1/49
www.st.com
49