UM1537 Datasheet, PDF (1/52 Pages) STMicroelectronics – STM320518-EVAL evaluation board

UM1537
User manual
STM320518-EVAL evaluation board
Introduction
The STM320518-EVAL evaluation board is designed as a complete demonstration and
development platform for STMicroelectronic's ARM cortex-M0 core-based
STM32F051R8T6 microcontroller. It features two I2Cs, two SPIs, two USARTs, a 12-bit
ADC, a 12-bit DAC, two GP comparators, internal 8 KB SRAM and 64 KB Flash, touch
sensing, CEC and SWD debugging support.
The full range of hardware features on the board is able to help you evaluate all peripherals
(motor control connector, RS-232, RS-485, audio DAC, linear sensor, microphone ADC,
TFT LCD, IrDA, IR LED, IR receiver, LDR, MicroSD card, CEC on two HDMI connectors, RF
E2PROM, temperature sensor and so on) and develop your own applications. Extension
headers make it possible to easily connect a daughterboard or wrapping board for your
specific application.
An ST-LINK/V2 is integrated on the board as an embedded in-circuit debugger and
programmer for the STM32 MCU.
Figure 1. STM320518-EVAL evaluation board
Table 1.
Applicable tools
Type
Evaluation tools
May 2012
Doc ID 023059 Rev 1
Part number
STM320518-EVAL
1/52
www.st.com