UM1483 Datasheet, PDF (1/35 Pages) STMicroelectronics – Low power motor control board STEVAL-IHM036V1

UM1483
User manual
Low power motor control board STEVAL-IHM036V1
featuring SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B
1
Introduction
This document describes the low power motor control board STEVAL-IHM036V1 featuring
the SLLIMM™ (small low-loss intelligent molded module) STGIPN3H60 and MCU
STM32F100C6T6B. The demonstration board is an AC/DC inverter that generates
a 3-phase waveform for driving 3-phase permanent magnet synchronous motors (PMSM)
with field-oriented control (FOC) up to maximal 100 W without sensors. The used controller
belongs to the STMicroelectronics™ ARM^® Cortex™-M3 core-based medium density
STM32™ MCU family.
The main device presented in this user manual is a universal, fully evaluated and populated
design consisting of a 3-phase inverter bridge based on the 600 V IGBT power module in
NDIP-26L package. The IGBT power module integrated all power IGBT switches with
freewheeling diodes together with the high voltage gate drivers. Thanks to this integrated
module, the system has been specifically designed to achieve power inverter in
a reliable and compact design. Such integration saves PCB space occupation and assembly
costs together with high reliability due to the design simplicity.
The board is designed to be compatible with single-phase mains for the European range of
supply voltage 230 VAC (+/- 15%), or corresponding DC supply voltage. The board includes
a power supply stage with VIPer™16 in buck configuration to generate +15 V supply voltage
required by the application.
This document is associated with the release of the STEVAL-IHM036V1 demonstration
board (see Figure 1).
Figure 1. STEVAL-IHM036V1
November 2011
Doc ID 022398 Rev 1
1/35
www.st.com