UM1470 Datasheet, PDF (1/19 Pages) STMicroelectronics – The purpose of this document is to describe

UM1470
User manual
STEVAL-ISA096V1 -12 V/150 mA adaptable buck-boost converter
Introduction
The purpose of this document is to describe the STEVAL-ISA096V1 switched mode power
supply (SMPS) demonstration board. The STEVAL-ISA096V1 is a non-isolated SMPS
designed in buck-boost topology capable of delivering up to 2 W output over a wide input
voltage range, providing a cost-effective and space-saving solution.
It also offers the user the possibility of adapting the circuit to their needs thanks to the
availability of a free PCB area.
The STEVAL-ISA096V1 SMPS generates a 12 V nominal output voltage. This board is
based on VIPer™06XS - a monolithic converter integrating an 800 V avalanche rugged
MOSFET and PWM controller in one package.
This document contains a basic technical description of the demonstration board (schematic
diagram, PCB details, and bill of material) as well as the most significant parameter
measurements (load regulation, efficiency, standby behavior, EMI and thermal behavior
data).
Figure 1. STEVAL-ISA096V1 demonstration board
May 2012
Doc ID 022241 Rev 1
1/19
www.st.com