UM1036 Datasheet, PDF (1/47 Pages) STMicroelectronics – This document describes the 2 kW 3-phase motor control evaluation

UM1036
User manual
2 kW 3-phase motor control STEVAL-IHM028V2 evaluation board
featuring the IGBT intelligent power module STGIPS20C60
Introduction
This document describes the 2 kW 3-phase motor control evaluation board featuring the
IGBT intelligent power module STGIPS20C60. The evaluation board is an AC-DC inverter
that generates a 3-phase waveform for driving 3-phase motors such as induction motors or
permanent magnet synchronous motors (PMSM) up to maximal 2000 W with or without
sensors.
The main device presented in this user manual is a universal, fully evaluated and populated
design consisting of a 3-phase inverter bridge based on the 600 V IGBT power module in
the SDIP 25L package mounted on a heatsink. The IGBT power module integrates all power
IGBT switches with freewheeling diodes together with high voltage gate drivers. Thanks to
this integrated module, the system has been specifically designed to achieve power
inversion in a reliable and compact design. Such integration saves PCB space occupation
and assembly costs, together with high reliability due to the design simplicity.
The board is designed to be compatible with single-phase mains, supplying from 90 VAC to
285 VAC or from 125 VDC up to 400 VDC for the DC voltage.
This document is associated with the release of the STEVAL-IHM028V2 evaluation board
(see Figure 1).
Figure 1. STEVAL-IHM028V2
November 2014
DocID18293 Rev 2
1/47
www.st.com