UM0900 Datasheet, PDF (1/43 Pages) STMicroelectronics – 1 kW 3-phase motor control demonstration board featuring

UM0900
User manual
1 kW 3-phase motor control demonstration board featuring
IGBT intelligent power module STGIPL14K60 STEVAL-IHM025V1
1
Introduction
This document describes the 1 kW 3-phase motor control demonstration board featuring the
IGBT intelligent power module STGIPL14K60. The demonstration board is an AC-DC
inverter that generates a 3-phase waveform for driving 3- or 2-phase motors such as
induction motors or PMSM motors up to 1000 W, with or without sensors.
The main device presented in this user manual is a universal, fully evaluated and populated
design consisting of a 3-phase inverter bridge based on the 600 V IGBT power module in
the SDIP 38L package mounted on heatsink. STGIPL14K60 integrates: high voltage, short-
circuit rugged IGBT and high voltage gate drivers with advanced features like integrated op-
amp suitable for advanced current sensing. Thanks to this integrated module, the system
has been specifically designed to achieve power inversion in a reliable and compact design.
The system architecture of the module based on integrated advanced features is specifically
designed to achieve an accurate and fast conditioning of the current feedback therefore
matching the typical requirements in field oriented control (FOC).
The board is designed to be compatible with single-phase mains, supplying from
90 VAC to 285 VAC or from 125 VDC up to 400 VDC for DC voltage.
This document is associated with the release of the demonstration board STEVAL-
IHM025V1 (see Figure 1 below).
Figure 1. STEVAL-IHM025V1
May 2010
Doc ID 17028 Rev 1
1/43
www.st.com