UM0592 Datasheet, PDF (1/22 Pages) STMicroelectronics – This document explains the use of the HDD extension demonstration board

UM0592
User manual
STEVAL-PCC006V1, HDD bridge extension
board for mass storage applications
Introduction
This document explains the use of the HDD extension demonstration board (STEVAL-
PCC006V1) which can be used for interfacing the hard disk to the EVAL-STR910 board.
The HDD bridge extension board for the EVAL-STR910 is built around STMicroelectronics'
ARM^® core-based STR912FAW44X6 ARM966E-S in a 128-pin LQFP128 package. This is
an extension board which connects to the EVAL-STR910. The extension board consists of a
hard disk connector, host termination resistors, general purpose connectors which connect
the CN5 and CN6 of EVAL-STR910, and a wrap area with 2.54 mm pitch through-hole with
one SO16 footprint.
Figure 1. STEVAL-PCC006V1, HDD bridge extension board
August 2009
Doc ID 15036 Rev 1
A!M-01397vV1
1/22
www.st.com