UM0428 Datasheet, PDF (1/27 Pages) STMicroelectronics – IGBT Power module evaluation kit - Semitop2 power board

UM0428
User manual
IGBT Power module evaluation kit - Semitop2 power board
Introduction
The Semitop2 evaluation board STEVAL-IHM011V1 is a complete platform to evaluate
STMicroelectronics power module devices (Semitop 2). Based on a cost effective, flexible
and open design, it is an evaluation platform compatible with the latest STMicroelectronics
microcontroller based solution. It includes the STG3P2M10N60B IGBT Power Module up to
10 amps, 600 voltage (see Note: 1). The STEVAL-IHM011V1 features a motor control
connector (MC-Connector) and hardware features for developing motor control applications
including hardware protection features such as current and thermal protection.
Figure 1. STEVAL-IHM011V1
Note: 1
July 2007
Features
■ 34-pin dedicated motor control connector
■ 5-pin Hall sensor/encoder input
■ Tachometer sensor input
■ Support for 5 V or 3.3 V microcontroller
■ Three configurations for current detection:
– 1 shunt resistor
– 3 shunt resistors or
– 3 external ICS (Insulated Current Sensor)
■ Current amplification network
■ BEMF detecting network
■ Hardware current protection
■ Hardware thermal protection (using on board temperature sensor)
■ Resistive brake network
The kit has been designed and tested to work with European mains so maximum 380 VDC.
Rev 2
1/27
www.st.com