UM0139 Datasheet, PDF (1/38 Pages) STMicroelectronics – The ST7-EMU3 series emulators are the third generation of high-end emulators for ST7

UM0139
User manual
ST7MDT10-EMU3
probe user guide
Introduction
The ST7-EMU3 series emulators are the third generation of high-end emulators for ST7.
EMU3 series emulators are designed to provide a complete range of advanced debugging
features during emulation. They come with all the adapters, connectors and sockets you
need to emulate any of the supported ST7 devices. In addition, they provide in-circuit
debugging and programming capability to give you start-to-finish control of application
development with ST7 Flash devices.
Your EMU3 probe is the component of the ST7-EMU3 emulator that contains target-
emulation hardware. It connects to your PC via the ST Micro Connect box, and it can
connect to your application board in place of your ST7.
The EMU3 probe’s Target Emulation Board (TEB) contains the hardware that allows you to
emulate an ST7 or ST7 sub-family. The modularity provided by the TEB makes it possible to
emulate a range of ST7 MCUs with one ST7-EMU3 emulator. For this reason, the
ST7MDT10 target emulation board is delivered either as part of the ST7MDT10-EMU3
emulator kit, or independently, in the ST7MDT10-TEB kit.
The ST7MDT10-EMU3 emulator is designed to emulate MCUs in the ST7226x, ST7LITE
sub-families and the ST7DALI.
Table 1. Related hardware for ST7MDT10-EMU3 probe
Orderable part
number
Description
AC7MDT10-D16/S16 SDIP16/SO16 Connection kit
AC7MDT10-D20/S20
AC7MDT10-D32/S28
DIP20/SO20 Connection kit
SDIP32/SO28 Connection kit
ST7MDT10-TEB
EMU3 probe’s Target Emulation Board (TEB)
June 2007
Rev 6
1/38
www.st.com