TSH95 Datasheet, PDF (1/9 Pages) STMicroelectronics – HIGH SPEED LOW POWER QUAD OPERATIONAL AMPLIFIER WITH DUAL STANDBY POSITION

TSH95
HIGH SPEED LOW POWER QUAD OPERATIONAL
AMPLIFIER WITH DUAL STANDBY POSITION
s 2 SEPARATE STANDBY : REDUCED
CONSUMPTION AND HIGH IMPEDANCE
OUTPUTS
s LOW SUPPLY CURRENT : 4.5mA
s HIGH SPEED : 150MHz - 110V/µs
s UNITY GAIN STABILITY
s LOW OFFSET VOLTAGE : 4mV
s LOW NOISE 4.2 nV/√Hz
s LOW COST
s SPECIFIED FOR 600Ω AND 150Ω LOADS
s HIGH VIDEO PERFORMANCES :
Differential Gain : 0.03%
Differential Phase : 0.07°
Gain Flatness : 6MHz, 0.1dB max. @ 10dB
gain
s HIGH AUDIO PERFORMANCES
s ESD TOLERANCE : 2kV
DESCRIPTION
The TSH95 is a quad low power high frequency
op-amp, designated for high quality video pro-
cessing. The device offers an excellent speed
consumption ratio with 4.5mA per amplifier for
150MHz bandwidth.
High slew rate and low noise make it also suitable
for high quality audio applications.
The TSH95 offers 2 separate complementary
STANDBY pins :
u STANDBY 1 acting on both n° 1 & 2
operators
u STANDBY 2 acting on both n° 3 & 4
operators
They reduce the consumption of the correspond-
ing operatorS and put the output in a high imped-
ance state.
ORDER CODE
Part Number
TSH95I
Package
Temperature Range
D
-40°C, +125°C
•
D = Small Outline Package (SO) - also available in Tape & Reel (DT)
D
SO16
(Plastic Micropackage)
PIN CONNECTIONS (top view)
Output 1 1
Inverting Input 1 2 -
Non-inverting Input 1 3 ⁺
V_CC ⁺ 4
Non-inverting Input 2 5 +
Inverting Input 2 6 ^-
Output 2 7
Standby 1 8
16 Output 4
- 15 Inverting Input 4
+ _{14 Non-inverting Input 4}
13 VCC ^-
+ ^{12 Non-inverting Input 3}
-
11 Inverting Input 3
10 Output 3
9 ^{Standby 2}
November 2000
1/9