TSH94 Datasheet, PDF (1/11 Pages) STMicroelectronics – HIGH SPEED LOW POWER QUAD OPERATIONAL AMPLIFIER WITH STANDBY POSITION

TSH94
HIGH SPEED LOW POWER QUAD
OPERATIONAL AMPLIFIER (WITH STANDBY POSITION)
s 2 SEPARATE STANDBY : REDUCED
CONSUMPTION AND HIGH IMPEDANCE
OUTPUTS
s LOW SUPPLY CURRENT : 4.5mA
s HIGH SPEED : 150MHz - 110V/µs
s UNITY GAIN STABILITY
s LOW OFFSET VOLTAGE : 3mV
s LOW NOISE 4.2 nV/√Hz
s LOW COST
s SPECIFIED FOR 600Ω AND 150Ω LOADS
s HIGH VIDEO PERFORMANCES :
Differential Gain : 0.03%
Differential Phase : 0.07°
Gain Flatness : 6MHz, 0.1dB max. @ 10dB
gain
s HIGH AUDIO PERFORMANCES
DESCRIPTION
The TSH94 is a quad low power high frequency
op-amp, designated for high quality video signal
processing. The device offers an excellent speed
consumption ratio with 4.5mA per amplifier for
150MHz bandwidth.
High slew rate and low noise make it also suitable
for high quality audio applications.
The TSH94 offers 2 separate complementary
STANDBY pins :
u STANDBY 1 acting on the n° 2 operator
u STANDBY 2 acting on the n° 3 operator
They reduce the consumption of the correspond-
ing operator and put the output in a high imped-
ance state.
ORDER CODE
Part Number
TSH94I
Package
Temperature Range
D
-40°C, +125°C
•
D = Small Outline Package (SO) - also available in Tape & Reel (DT)
D
SO16
(Plastic Micropackage)
PIN CONNECTIONS (top view)
Output 1 1
Inverting Input 1 2 -
Non-inverting Input 1 3 ⁺
V_CC ⁺ 4
Non-inverting Input 2 5 +
Inverting Input 2 6 ^-
Output 2 7
Standby 1 8
16 Output 4
- 15 Inverting Input 4
+ _{14 Non-inverting Input 4}
13 VCC ^-
+ ^{12 Non-inverting Input 3}
-
11 Inverting Input 3
10 Output 3
9 ^{Standby 2}
October 2000
1/11