English
Language : 

TS914IDT Datasheet, PDF (1/17 Pages) STMicroelectronics – Rail-to-rail CMOS quad operational amplifier
TS914, TS914A
Rail-to-rail CMOS quad operational amplifier
Features
■ Rail-to-rail input and output voltage ranges
■ Single (or dual) supply operation from 2.7 to
16 V
■ Extremely low input bias current: 1 pA typical
■ Low input offset voltage: 5 mV max. (A grade)
■ Specified for 600 Ω and 100 Ω loads
■ Low supply current: 200 μA/ampli. (VCC = 3 V)
■ Latch-up immunity
■ Spice macromodel included in this specification
Related products
■ See TS56x series for better accuracy and smaller
packages
Description
The TS914 device is a rail-to-rail CMOS quad
operational amplifier designed to operate with a
single or dual supply voltage.
The input voltage range Vicm includes the two
supply rails VCC+ and VCC-.
The output reaches VCC- +50 mV, VCC+ -50 mV,
with RL = 10 kΩ, and VCC- +350 mV, VCC+ -
350 mV, with RL = 600 Ω.
This product offers a broad supply voltage
operating range from 2.7 to 16 V and a supply
current of only 200 μA/amp. (VCC = 3 V).
The source and sink output current capability is
typically 40 mA (at VCC = 3 V), fixed by an internal
limitation circuit.
Datasheet −production data
D
SO-14
(plastic micropackage)
Pin connections (top view)
November 2012
This is information on a product in full production.
Doc ID 4475 Rev 8
1/17
www.st.com
17