TS613_02 Datasheet, PDF (1/10 Pages) STMicroelectronics – DUAL WIDE BAND OPERATIONAL AMPLIFIER WITH HIGH OUTPUT CURRENT

TS613
DUAL WIDE BAND OPERATIONAL AMPLIFIER
WITH HIGH OUTPUT CURRENT
s LOW NOISE : 3nV/√Hz, 1.2pA/√Hz
s HIGH OUTPUT CURRENT : 200mA
s VERY LOW HARMONIC AND INTERMODU-
LATION DISTORTION
s HIGH SLEW RATE : 40V/µs
s SPECIFIED FOR 25Ω LOAD
D
SO8
(Plastic Micropackage)
DESCRIPTION
The TS613 is a dual operational amplifier featur-
ing a high output current (200mA min.), large
gain-bandwidth product (130MHz) and capable of
driving a 25Ω load with a 160mA output current at
±6V power supply.
This device is particularly intended for applications
where multiple carriers must be amplified simulta-
neously with very low intermodulation products.
The TS613 is housed in a SO8 plastic package
and a SO8 Exposed-Pad plastic package.
DW
SO8 Exposed-Pad
(Plastic Micropackage)
PIN CONNECTIONS (top view)
APPLICATION
s UPSTREAM line driver for Asymmetric Digital
Subscriber Line (ADSL) (NT).
ORDER CODE
Part
Number
TS613ID
TS613IDW
Temperature
Range
-40, +85°C
-40, +85°C
Package
D
DW
•
•
Output1 ₁
Inverting Input1 2 ^_
Non Inverting Input1 3 ⁺
VCC - 4
8 VCC +
7 Output2
_ _{6 Inverting Input2}
+ _{5 Non Inverting Input2}
Cross Section View Showing Exposed-Pad
This pad can be connected to a (-Vcc) copper area on the PCB
D = Small Outline Package (SO) - also available in Tape & Reel (DT)
DW = Small Outline Package inExposed-Pad (SO) - also available in
Tape & Reel (DWT)
December 2002
1/10