TS612_02 Datasheet, PDF (1/10 Pages) STMicroelectronics – DUAL WIDE BAND OPERATIONAL AMPLIFIER WITH HIGH OUTPUT CURRENT

TS612
DUAL WIDE BAND OPERATIONAL AMPLIFIER
WITH HIGH OUTPUT CURRENT
s LOW NOISE : 3nV/√Hz, 1.2pA/√Hz
s HIGH OUTPUT CURRENT : 200mA
s VERY LOW HARMONIC AND INTERMODU-
LATION DISTORTION
s HIGH SLEW RATE : 40V/µs
s SPECIFIED FOR 25Ω LOAD
DESCRIPTION
The TS612 is a dual operational amplifier featur-
ing a high output current (200mA min.), large
gain-bandwidth product (130MHz) and capable of
driving a 25Ω load with a 160mA output current at
±6V power supply.
This device is particularly intended for applications
where multiple carriers must be amplified simulta-
neously with very low intermodulation products.
The TS612 is housed in SO20 batwing plastic
package for a very low thermal resistance.
The TS612 is fitted out with Power Down function
in order to decrease the consumption.
D
SO20 Batwing
(Plastic Micropackage)
ORDER CODE
Part Number Temperature Range
TS612ID
-40, +85°C
Package
D
•
D=Small Outline Package (SO) - also available in Tape & Reel (DT)
PIN CONNECTIONS (top view)
APPLICATION
s UPSTREAM line driver for Asymmetric Digital
Subscriber Line (ADSL) (NT).
SO20 batwing - Top View
Power Down 1 1
Inverting input 1 2
_
Non-inverting input 1 3
+
Vcc - 4
Thermal Heat Tabs
connected to -Vcc
Vcc - 5
Vcc - 6
Vcc - 7
Non-Inverting input 2 8
+
_
Inverting input 2 9
Power Down 2 10
20 Vcc+ 1
19 Output 1
18 Vcc-
17 Vcc -
16 Vcc -
Thermal Heat Tabs
15 Vcc - ^{connected to -Vcc}
14 Vcc -
13 GND
12 Output 2
11 Vcc+ 2
December 2002
1/10