TS272ACD Datasheet, PDF (1/9 Pages) STMicroelectronics – HIGH PERFORMANCE CMOS DUAL OPERATIONAL AMPLIFIERS

TS272C,I,M
HIGH PERFORMANCE
CMOS DUAL OPERATIONAL AMPLIFIERS
s OUTPUT VOLTAGE CAN SWING TO
GROUND
s EXCELLENT PHASE MARGIN ON
CAPACITIVE LOADS
s GAIN BANDWIDTH PRODUCT: 3.5MHz
s STABLE AND LOW OFFSET VOLTAGE
s THREE INPUT OFFSET VOLTAGE
SELECTIONS
DESCRIPTION
The TS272 devices are low cost, dual operational
amplifiers designed to operate with single or dual
supplies. These operational amplifiers use the ST
silicon gate CMOS process allowing an excellent
consumption-speed ratio. These series are ideally
suited for low consumption applications.
Three power consumptions are available allowing
to have always the best consumption-speed ratio:
u I_CC = 10µA/amp.: TS27L2 (very low power)
u I_CC = 150µA/amp.: TS27M2 (low power)
u I_CC = 1mA/amp.: TS272 (standard)
These CMOS amplifiers offer very high input im-
pedance and extremely low input currents. The
major advantage versus JFET devices is the very
low input currents drift with temperature (see fig-
ure 2).
ORDER CODE
Part Number Temperature Range
TS272C/AC/BC
0°C, +70°C
TS272I/AI/BI
-40°C, +125°C
TS272M/AM/BM
-55°C, +125°C
Example : TS272ACN
Package
NDP
•••
•••
•••
N = Dual in Line Package (DIP)
D = Small Outline Package (SO) - also available in Tape & Reel (DT)
P = Thin Shrink Small Outline Package (TSSOP) - only available
in Tape & Reel (PT)
N
DIP8
(Plastic Package)
D
SO8
(Plastic Micropackage)
P
TSSOP8
(Thin Shrink Small Outline Package)
PIN CONNECTIONS (top view)
1
2
-
3
+
4
8
7
-
6
+
5
1 - Output 1
2 - Inverting Input 1
3 - Non-inverting Input 1
4 - V _CC ^-
5 - Non-inverting Input 2
6 - Inverting Input 2
7 - Output 2
8 - V _CC ⁺
November 2001
1/9