TN1189 Datasheet, PDF (1/4 Pages) STMicroelectronics – The purpose of this technical note

TN1189
Technical note
A3G4250D: supplementary data related to the
3-axis digital output gyroscope
Introduction
The purpose of this technical note is to provide supplementary information related to the
A3G4250D gyroscope (3D digital gyroscope for automotive telematics/navigation
applications). This document explains the procedure to execute the asynchronous mode
reading of data sets based on device behavior in consumer applications.
This document does not replace the content of the A3G4205D datasheet, with the exception
of Figure 10 on page 20 in paragraph 3.2.4, which is modified as follows in the figure below.
Figure 1. FIFO access sequence in asynchronous mode
August 2014
DocID026766 Rev 1
1/4
www.st.com
4