TL7705ACD1013TRA Datasheet, PDF (1/7 Pages) STMicroelectronics – SUPPLY VOLTAGE SUPERVISORS

®
TL7700A Series
SUPPLY VOLTAGE SUPERVISORS
. POWER-ON RESET GENERATOR
. AUTOMATIC RESET GENERATION AFTER
VOLTAGE DROP
. WIDE SUPPLY VOLTAGE RANGE ... 3V TO
18V
. PRECISION VOLTAGE SENSOR
. TEMPERATURE-COMPENSATED VOLTAGE
REFERENCE
. TRUE AND COMPLEMENT RESET OUTPUTS
. ₎ EXTERNALLY ADJUSTABLE PULSE WIDTH
N
Minidip
Product(s _DESCRIPTION
te _{The TL7700A series are monolithic supply voltage}
le _{supervisor IC’s specifically designed for use as reset}
so ^{controllers in microcomputer and microprocessor}
b ^{systems. During power-up the device tests the sup-}
ply voltage and keeps the RESET and RESET out-
- ^{O puts active (high and low, respectively) as long as}
) ^{the supply voltage has not reached its nominal volt-}
t(s ^{age value. Taking RESIN low has the same effect.}
To ensure that the microcomputer system has reset,
c _{the TL7700A then initiates an internal time count}
u _{that delays the return of the reset outputs to their in-}
rod ^{active states. Since the time delay for most micro-}
computers and microprocessors is in the order of
P _{several machine cycles, the device internal time de-}
te ^{lay is determined by an external capacitor con-}
nected to the CT input (pin 3).
le _tpo
=
1.3
x
4
10
x
CT
so _{Where : CT is in farads (F) and tpo in seconds (s). In}
b_{addition, when the supply voltage drops below the}
Onominal value, the outputs will be active until the
D
SO8
ORDERING NUMBERS
Temperature Range Minidip
0 to 70^oC
TL77XXACP
-25 to 85^oC
TL77XXAIP
S08
TL77XXACD
TL77XXAID
PIN CONNECTION (top view)
supply voltage returns to the nominal value. An ex-
ternal capacitor (typically 0.1 µF) must be connected
to the REF output (pin 1) to reduce the influence of
fast transients in the supply voltage.
The TL7700AI series is characterized for operation
from – 25^oC to 85^oC ; the TL7700AC series is char-
acterized from 0^oC to 70^oC.
July 2000
1/7