STV8102 Datasheet, PDF (1/3 Pages) STMicroelectronics – 128 x 64 OLED passive matrix controller/driver

STV8102
128 x 64 OLED passive matrix controller/driver
Data Brief
Features
■ Supports 128 x 64 dot matrix panels
■ Embedded DC/DC step-up converter
■ Display power supply up to 20V
■ Device power supply: 1.8 to 3.6V
■ Low-power consumption suitable for battery-
operated systems
■ Column source current: 508µA, max
■ Row sink current: 64mA
■ On-chip oscillator
■ Programmable multiplexing rate
■ Self adaptive panel addressing scheme
■ PowerMizer™ driving scheme
■ Brightness control with built-in aging
compensation
■ Built-in display pattern generator
■ Selectable 8-bit parallel interface (68xx, 80xx
series), serial peripheral interface and I²C
interface
■ Embedded 128 x 64 x 1-bit display RAM
■ Row and column re-mapping
■ Screen saver mode
Description
The STV8102 is a low-power, controller/driver
“combo” IC for Organic Light Emitting Diode
(OLED) dot passive matrix display systems.The
STV8102 supports black-an-white, monochrome
displays of up to 128 columns by 64 rows.
The STV8102 provides all necessary functions in
a single chip, including on-chip OLED supply
control and bias current generators resulting in a
minimum of external components and in very low-
power consumption.
The STV8102 communicates with the system via
fully configurable interfaces (parallel, serial or I²C)
to ease interfacing with the host microcontroller.
The STV8102 has a set of control and status
registers that can be addressed by the interfaces.
January 2007
Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3