STV7617 Datasheet, PDF (1/17 Pages) STMicroelectronics – PLASMA DISPLAY PANEL SCAN DRIVER

STV7617, STV7617D, STV7617U
PLASMA DISPLAY PANEL SCAN DRIVER
FEATURE
s 64/65 SELECTABLE OUTPUT PLASMA
DISPLAY DRIVER
s 100 V ABSOLUTE MAXIMUM SUPPLY
s 5 V SUPPLY FOR LOGIC
s 100/850 mA SOURCE/SINK OUTPUT
s 700 mA SOURCE/SINK OUTPUT DIODE
s 65-bit BIDIRECTIONAL SHIFT REGISTER
(8 MHz)
s HIGH IMPEDANCE OUTPUT CONTROL
s BCD TECHNOLOGY
s 100-PIN TQFP PACKAGE WITH
INTEGRATED HEATSINK
TQFP100 (14 x 14 x 1.4 mm Slug-down)
(Thin Plastic Quad Flat Pack)
ORDER CODE: STV7617D
DESCRIPTION
The STV7617 is a scan driver for Plasma Display
Panel (PDP) implemented in ST’s proprietary
BCD technology. Using a 65-bit cascadable
8 MHz shift register, it drives 65 high current &
high voltage outputs. The STV7617 can be config-
ured either in 64 or 65 outputs depending on the
SEL input Pin.
By serially connecting several STV7617, any ver-
tical pixel definition can be performed. The
STV7617 is supplied with a separated 90V power
output supply and a 5 V logic supply. All command
inputs are CMOS compatible. The STV7617 pack-
age is a 100-pin TQFP with integrated heatsink lo-
cated on the bottom (STV7617D) or top
(STV7617U) of the package. It is also available
without heatsink (STV7617).
TQFP100 (14 x 14 x 1.4 mm)
(Thin Plastic Quad Flat Pack)
ORDER CODE: STV7617
TQFP100 (14 x 14 x 1.4 mm Slug-up)
(Thin Plastic Quad Flat Pack)
ORDER CODE: STV7617U
Version 4.1
June 2000
1/17
This is preliminary information on a new product in development or undergoing evaluation. Details are subject to change without notice.
1