|
STUSBCD01B Datasheet, PDF (1/19 Pages) STMicroelectronics – USB charger detection interface | |||
|
STUSBCD01B
USB charger detection interface
Features
â Capable of detecting dedicated USB chargers
and host chargers (current sink and dedicated
methods)
â Operates with VBAT supply voltage ranging
from 2.2 V to 4.5 V
â Active high open drain hardware detection pin
(DETECT)
â GPIO control interface
â 1.6 V - 2.8 V interface voltage range (VIO)
â VBUS voltage 6 V clamping circuit
â Low DP-DM input capacitance
â ESD: HBM ± 2 kV, CDM 500 V on every pin
â 12 bumps Flip-Chip package, 1.6 x1.2 mm,
pitch 0.4 mm, max thickness 0.60 mm,
Halogen free RoHS compliant package
Applications
â Mobile phones
â PDAs, MP3 players
Description
The STUSBCD01B is a USB charger detection IC
which can detect dedicated USB chargers,
Host/Hub chargers or standard host ports
connected to the USB DP/DM data lines.
The device implements two different detection
methods in order to be able to distinguish
between a dedicated charger and a Host/Hub
charger.
Flip-Chip 12 (1.6 x 1.2 mm)
Operation is controlled through three general
purpose I/O pins; a hardware open drain
detection output is also available.
An internal regulator provides the 1.8 V supply
voltage for the internal blocks and state machine
while a clamping device prevents VBUS voltage
from going over 6 V (typ.).
The STUSBCD01B is available in a 12 bumps
Flip-Chip 0.4 mm pitch package.
Table 1. Device summary
Order code
STUSBCD01BJR
November 2008
Package
Flip-Chip 12 (1.6 x 1.2 mm)
Rev 1
Packaging
3000 parts per reel
1/19
www.st.com
19
|
▷ |