STUSB06E Datasheet, PDF (1/20 Pages) STMicroelectronics – 3.3 V USB transceiver

STUSB06E
3.3 V USB transceiver
Features
■ Compliant to USB v2.0 for full-speed (12 Mb/s)
and low-speed (1.5 Mbps) operation
■ HBM = ± 9 kV on D+, D- lines, ± 7 kV on V_REG
■ ± 6 kV ESD compliant to IEC-61000-4-2 on D+,
D-, V_REG lines
■ Separate I/O supply with operation down to
1.6 V
■ Integrated 150 kΩ switchable pull-up from D+
to V_REG
■ Supports host negotiation protocol (DP pull-up
auto-connection after SE0)
■ SEO active low interrupt in HNP mode (INT,
VCC_IO referred)
■ Very low power consumption to meet USB
'suspend' current requirements
■ No power supply sequencing requirements
■ Software controlled re-enumeration
(SOFTCON)
■ Available in small BCC++16L package
3 mm x 3 mm max thickness 0.80 mm halogen
free RoHS compliant package
Applications
■ Mobile phones
■ PDAs
■ MP3 players
■ Digital still cameras
BCC++16L
(3 mm x 3 mm)
Description
The STUSB06E is a single chip transceiver that
complies with the physical layer specifications of
the Universal Serial Bus (USB) v2.0 standard. It is
powered by external 3.3 V supply and has an
integrated 150 kΩ resistor to implement charger
detection with weak pull-up method.
The STUSB06E also supports sharing mode
when V_REG is not present, which allows the D+/D-
lines to be shared with other serial protocols.
It supports both full-speed (12 Mbps) and low-
speed (1.5 Mbps) operation. It is also designed to
operate down to 1.6 V so that it is compatible with
lower system voltages of most portable systems,
which include cell phones, PDAs and MP3
players.
Table 1. Device summary
Order code
STUSB06EHTR
December 2008
Package
BCC++16L (3 mm x 3 mm)
Rev 1
Packaging
3000 parts per reel
1/20
www.st.com
20