STULPI01A_08 Datasheet, PDF (1/44 Pages) STMicroelectronics – High speed USB On-The-Go ULPI transceiver

STULPI01A
STULPI01B
High speed USB On-The-Go ULPI transceiver
Features
■ USB-IF high speed certified to the Universal
Serial Bus specification Rev 2.0.
■ Meets the requirements of the Universal Serial
Bus specification revision 2.0, On-The-Go
supplement to the USB 2.0 specification 1.0a
and ULPI transceiver specification 1.1.
■ Standard ULPI (UTMI+ low pin interface) 1.1
digital interface.
■ Fully compliant with ULPI 1.1 register set.
■ External square wave clock with 1V8VIO
amplitude must be applied to oscillator input XI.
■ Supports 480 Mbit/s high speed, 12 Mbit/s full-
speed and 1.5 Mbit/s low speed modes of
operation.
■ Supports 2.7 V UART mode.
■ Supports session request protocol (SRP) and
host negotiation protocol (HNP) for dual-role
device features.
■ Ability to control external charge pump for
higher VBUS currents.
■ Single supply, +3 V to +4.5 V voltage range.
■ Integrated dual voltage regulator to supply
internal circuits with stable 3.3 V and 1.2 V.
■ Integrated over current detector.
■ Integrated HS termination and FS/LS/OTG
pull-up/pull-down resistors.
■ Integrated USB 2.0 “short-circuit withstand”
protection.
■ Power down mode with very low power
consumption for battery-powered devices.
■ Ideal for system ASICs with built-in USB host,
device or OTG cores.
■ Available in µTFBGA36 RoHS package.
■ -40 °C to 85 °C operating temperature range.
µTFBGA36
Applications
■ Mobile phones
■ PDAs
■ MP3 players
■ Digital still cameras
■ Set top box
■ Portable navigation devices
Description
The STULPI01 is a high speed USB 2.0
transceiver compliant with ULPI (UTMI+ low pin
interface) and OTG (On-The-Go) specifications,
providing a complete physical layer solution for
any high speed USB host, device or OTG dual
role core. It allows USB ASICs to interface with
the physical layer of the USB through a 12-pin
interface. It contains VBUS comparators, ID line
detector, USB differential driver and receivers and
complete ULPI register map and interrupt
generator. The STULPI01 transceiver is suitable
for mobile applications and battery powered
devices because of its low power consumption,
power down operating mode and minimal
die/package dimensions.
June 2008
Rev 1
1/44
www.st.com
44