STTH16BC065C Datasheet, PDF (1/3 Pages) STMicroelectronics – high voltage rectifier

STTH16BC065C
650 V high voltage rectifier for BC² topology
Data brief
Features
■ high voltage rectifier
■ optimized diode for BC² topology (ST patent)
■ low switching losses
■ improves efficiency by up to 2.5% compared to
a conventional continuous mode PFC using
standard ultrafast 600 V PN diodes
■ efficiency performance similar to traditional
topologies using 600 V Schottky power diodes
with no reverse recovery charges used in CCM
PFC
■ provides a cost-effective solution to meet the
80+ efficiency requirements
■ supports PFC working up to 300 kHz
■ suitable for PFC up to 1 kW
■ compatible with standard PFC controller ICs
Description
The STTH16BC065C is a specific rectification
diode used in continuous mode power factor
correction working in the BC²topology. This diode
has been specially designed for the dedicated
BC² topology. Its electrical characteristics were
specifically studied to optimize the
cost/performance ratio. As a result, SMPS
efficiency improvements of up to 2.5%
(comparable with topologies using SiC) can be
achieved at an optimized cost.
A1
K
A2
A2
K
A1
TO-220AB
STTH16BC065CT
Table 1. Device summary
Symbol
I_F(AV)
V_RRM
Value
2x8A
650 V
November 2010
Doc ID 18195 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3