STSLVDSP27 Datasheet, PDF (1/23 Pages) STMicroelectronics – 8-bit low voltage serializer with 1.8V high speed dual differential line drivers and embedded DPLL

STSLVDSP27
8-bit low voltage serializer with 1.8V high speed
dual differential line drivers and embedded DPLL
Features
■ Sub-low voltage differential signaling:
V_OD = 150mV with R_T = 100Ω, C_L = 10pF
■ Clock range: 4 to 27 MHz in parallel mode,
BYP = Gnd
■ Operative frequency serial mode, BYP = V_DD;
DIN0 to DOUT, CLKIN to CLKOUT,
f_OPR = 1 to 208 MHz max
■ Embedded DPLL requires no external
components
■ Output voltage rise and fall times
t_rVOD = t_fVOD = 610ps typ at f_OPR = 208MHz
■ High speed propagation delay times
t_pLH~t_pHL= 2.1ns typ at V_DD = 3.0V; V_IO = 1.8V
■ Operating voltage range:
V_DD (OPR) = 2.5V to 3.6V
V_IO (OPR) = 1.65V to 1.95V
■ High impedance on driver outputs
I_OZ = 1µA max; EN = Gnd; V_O = Gnd or V_IO
■ Low voltage CMOS input threshold
(DIN0-DIN7, CLKIN, EN, BYP, DVO, DV1)
V_IL = 0.3 x V_DD max; V_IH = 0.7 x V_DD min
■ 3.6V tolerant on all inputs
(DIN0-DIN7, CLKIN, EN, BYP, DV0, DV1)
■ Lead-free Flip-Chip package
■ SMIA CCP1 (MIPI CSI-1) compatible PHY
Description
The STSLVDSP27 is an 8:1 bit serializer with
embedded DPLL. The dual differential line drivers
implement the electrical characteristics of sub-low
voltage differential signaling (subLVDS), bringing
out the serialized data and related synchronous
clock signal. The STSLVDSP27
Order code
Flip-Chip20
serializer IC is provided with two power supply
rails, V_DD and V_IO. The first supply is related to
the logic levels of the input data (DIN0-DIN7,
CLKIN) and Enables (EN, BYP, DV0, DV1) pins.
V_IO provides the power supply to the output
current drivers in the device. V_IO is always
expected to be a nominal 1.8V. V_DD depends on
the application, but will always be equal to or
higher than V_IO. In order to minimize static current
consumption, it is possible to shut down the
transmitters when the interface is not used by
setting a power-down (EN) pin. This operation
reduces the maximum current consumption to
20µA, making this device ideal for portable
applications like mobile phones and portable
battery equipment. Simplified functionality can be
reached using the BYP select pin, which disables
the internal DPLL circuitry. When this pin is High
the device can work with serialized signals from
DIN0 input only. A synchronous CLKIN signal
must be provided and it will be put-out using sub-
LVDS level by CLKOUT port; the sub-LVDS data
will be put-out by DOUT port at a maximum
frequency of 208Mhz. This innovative device
provides an optimized high-speed link solution
from different CMOS sensor devices (parallel or
serial outputs) to more advanced graphic
controllers in mobile phone applications. All inputs
and outputs are equipped with protection circuits
against static discharge, providing ESD immunity
from transient excess voltage. The STSLVDSP27
is designed for operation over the commercial
temperature range -40°C to 85°C.
Part number
STSLVDSP27BJR
June 2007
Temperature range
-40 to 85 °C
Package
Flip-Chip20 (Tape & Reel)
Rev. 1
Packaging
3000 parts per reel
1/23
www.st.com
23