STRF2163 Datasheet, PDF (1/2 Pages) STMicroelectronics – CONTACTLESS READER CHIP SET

STRF2163
CONTACTLESS READER CHIP SET
FUNCTION: ANALOG FRONT END FOR
CONTACTLESS SMARTCARD READER
s GENERAL DESCRIPTION
– This is an analog front end dedicated to contact-
less Smartcards.
– This interface complies with ISO 14443-2 Type
B: powering, data transfer from reader to card
with amplitude modulation, data transfer from
card to reader.
s MAIN FEATURES
– Supply voltage: from 5 V to 15 V
– Modulation: 10% ASK
– Data transfer to card: up to 424 KBit/second
– Data transfer to reader: up to 424 KBit/second
– DC subcarrier output level
– Quartz oscillator 13.56 MHz ± 100 ppm
DATA BRIEFING
FUNCTION: DECODER AND FRAME
FORMATING FOR CONTACTLESS
SMARTCARD READERS
s GENERAL DESCRIPTION
– This is an FPGA dedicated to contactless Smart-
card. This interface complies with ISO 14443-3
Type B
s MAIN FEATURES
– Supply voltage: 3.3 V
– Programmable data transfer from reader to card
– 106 KBit/second, 212 KBit/second and 424 KBit/
second
– Programmable data transfer from card to reader
– 106 KBit/second, 212 KBit/second and 424 KBit/
second
– 8 bit parallel interface for MCU
– Programmable SCI interface from 4800 to 115
KBit/second
FUNCTION: MCU FOR CONTACTLESS
SMARTCARD READER
s GENERAL DESCRIPTION
– the ST92163 is a 8/16 bit MCU
s MAIN FEATURES
– Supply voltage: 5 V
– Internal memory 16 K bytes OTP
– 2 K Bytes of RAM
– 24 MHz CPU frequency
– Full speed USB
– SCI up to 315 KBit
– External memory up to 256 KBytes
– Rich instruction set with 14 addressing modes,
versatile development tools, including assem-
bler, linker, C compiler, hardware emulators and
real time operating system.
October 1999
1/2
This is Brief Data from STMicroelectronics. Details are subject to change without notice. For complete data, please contact
your nearest Sales Office or SmartCard Products Divison, Rousset, France. Fax: [phone]
1