STR91X-SK_1 Datasheet, PDF (1/4 Pages) STMicroelectronics – IAR’s complete, low cost starter kits for STR7 and STR9

STR91X-SK/IAR, STR7xx-SK/IAR
IAR’s complete, low cost starter kits for STR7 and STR9
Data Brief
The KickStart Kits™ (STR711-SK/IAR, STR712-
SK/IAR, STR730-SK/IAR, STR731-SK/IAR,
STR750-SK/IAR and STR91X-SK/IAR) are IAR’s
complete, cost-effective solutions for starting
application development and evaluating a full
range of STMicroelectronic’s ARM^® core-based
microcontrollers.
They come with all the hardware and software
you need to start developing applications for a full
range of STMicroelectonic’s ARM7TDMI™ and
ARM966E™ core-based microcontrollers. The
kits include the KickStart Development Board with
target microcontroller, the IAR JLink USB-to-
JTAG debugger and IAR Embedded Workbench^®
for ARM (EWARM) integrated development
environment with the 32KB KickStart version of
the C/C++ compiler, built in Flash loader and
sample projects for all device peripherals.
Starter kit architecture
JLink– USB-to-JTAG in-circuit
debugger/programmer integrates fully with
EWARM, allowing you to download the
application to your target and debug it while it
runs on your ST ARM core-based microcontroller.
KickStart development board– evaluation board
that provides a full range of features (I/Os, ADC,
UART, SPI, I²C, USB...) to help you evaluate and
start developing applications for the included
microcontroller. The board is powered from the
JLink’s USB connection with the host PC.
IAR development software– a suite of software
tools for all phases of application development
that includes:
IAR Embedded Workbench for ARM integrated
development environment with the KickStart
32KB C/C++ compiler to build the application and
the C-SPY™ debugger for debugging the
application while it runs on your microcontroller.
VisualSTATE^® 20-state version of IAR’s graphical
design environment with C/C++ code generator
for developing application code based on
machine states.
Starter kit key features
JLink:
■ Supplies power from USB connection via pin
19 of the JTAG connector (no additional power
supply required).
■ Download speed up to 50KB/sec
■ Maximum JTAG speed 8MHz
■ Auto speed recognition
■ 20-pin standard JTAG connector
■ USB and 20-pin flat cable included
■ Level shifter for 3.3V to 5V conversion
(STR73X-SK/IAR, STR750-SK/IAR, STR91X-
SK/IAR)
■ Supported platforms: Microsoft^® Windows^®
2000 and XP
October 2006
Rev 4
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4