STMPE1600QTR Datasheet, PDF (1/27 Pages) STMicroelectronics – 16-bit port expander with ultra-low power consumption

STMPE1600
16-bit port expander with ultra-low power consumption
Xpander Logic™
Datasheet −production data
Features
■ 16 GPIOs which default to 16 inputs on power-
up
■ Serial I²C interface (0 to 400 kHz) to the host
with noise filter
■ Operating voltage 1.65 V - 3.6 V
■ I/O voltage 1.65 V - 3.6 V
■ Interrupt output pin
■ Internal power-on-reset
■ Wakeup feature on each I/O
■ Up to 8 devices sharing the same bus
■ (3 address pins)
■ 8 mA current drive/sink on each GPIO at 3.3 V
■ < 1µA suspend current
■ ESD protection exceeds 2 KV HBM per
JESD22-A114
■ Latch-up testing exceeding 100 mA
■ Package: QFN24 (4 x 4 mm with 0.5 mm pitch)
Applications
■ Portable media players
■ Game consoles
■ Mobile phones
■ Smart phones
QFN24
(4 x 4 mm)
Description
The STMPE1600 is a GPIO (general purpose
input/output) port expander able to interface a
main digital ASIC via the two-line bidirectional bus
(I2C). A separate GPIO expander IC is often used
in mobile multimedia platforms to solve the
problems of the limited amount of GPIOs typically
available on the digital engine.
I/O expanders provide a simple solution when
additional I/O are needed for several interface
functions such as sensors, pushbuttons, LEDs,
fans, etc.
The STMPE1600 offers great flexibility as each
I/O can be configured as input or output. The
device has been designed with very low quiescent
current and includes a wakeup feature for each
I/O, to optimize the power consumption of the
device.
Table 1.
Device summary
Order code
STMPE1600QTR
Package
QFN24
February 2013
This is information on a product in full production.
Doc ID 16938 Rev 3
Packing
Tape and reel
1/27
www.st.com
27