STM8T14X-SB Datasheet, PDF (1/3 Pages) STMicroelectronics – STM8T14x device programming

ST-TSLINK STM8T14X-SB
Features
■ USB connection for the PC link
■ 20-pin connector to interface between the
ST-TSLINK dongle and the STM8T14x device
(either on the STM8T14X-SB socket board or
on a user specific connection).
Description
The ST-TSLINK dongle has been designed to
program the STM8T14x devices in the easiest
way possible. The ST-TSLINK simply plugs into a
PC with ST Visual Programmer (STVP) software
on one side and a 20-pin HE10 connector on the
other side.
It is recommended to connect the ST-TSLINK to
the 20-pin HE10 connector of an STM8T14X-SB
socket board to program various user options,
such as device sensitivity, output mode, shield,
and detection timeout duration.
However you may connect the ST-TSLINK directly
to a device, in this case the customer must make
the connection between the device and the ST-
TSLINK.
STM8T14x device programming
Data brief
.
Table 1.
Device summary
Order code
Reference
ST-TSLINK
Programming dongle for STM8T14x
devices and STM8T14X-SB socket
boards.
STM8T14X-SB
Socket board for STM8T14x
devices.
October 2010
Doc ID 18016 Rev 2
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3