STM32W-RFCKIT Datasheet, PDF (1/3 Pages) STMicroelectronics – STM32W Low-cost RF control kit

STM32W-RFCKIT
STM32W Low-cost RF control kit
Data brief
Features
■ STM32W System-on-Chip 32-bit ARM®
Cortex™-M3 processor
■ 2.4 GHz IEEE 802.15.4 transceiver and Lower
MAC
■ 128-Kbyte Flash and 8-Kbyte RAM memory
■ Flash memory upgrade capability via USB
■ ARM Serial Wire Debug (SWD) interface
(Remote board)
■ Designed to be powered by USB or with 2 AAA
batteries (Remote board)
■ Two user-defined LEDs (green and yellow)
■ Five push buttons to create easy-to-use remote
functions (Remote board)
■ Interoperable with other STM32W tool boards
to enlarge wireless network capabilities
■ 802.15.4, ZigBee RF4CE, ZigBee Pro,
6LoWPAN (Contiki) wireless protocols
Description
The STM32W RF Control Kit is a low-cost and
quick way to get started using STM32W-based
point-to-point wireless control applications.
It includes everything required by beginners and
experienced users to start developing RF control
systems. The STM32W RF Control Kit includes
one remote board and one receiver board (USB
dongle), both using the STM32W microcontroller
packaged in a VFQFPN48 for the remote board
and VFQFPN40 for the USB dongle.
Both boards are also fitted with an STM32F103
microcontroller providing an easy-to-connect
solution between a USB link to the PC world.
Debug capabilities are provided by a mini-JTAG
connector interface on the remote board (not
fitted).
Free, ready-to-run application firmware are
provided at www.st.com/stm32w_rfcontrol.
January 2011
Doc ID 18394 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3