STM32L152D-EVAL Datasheet, PDF (1/3 Pages) STMicroelectronics – STM32L152D-EVAL evaluation board

STM32L152D-EVAL
STM32L152D-EVAL evaluation board
Features
■ STM32L152ZDT6 microcontroller
■ Four 5 V power supply options:
– Power jack
– ST-LINK/V2 USB connector
– User USB connector
– Daughterboard
■ Audio jack connected to I2S DAC or
STM32L152ZDT6 internal DAC
■ Microphone connected to ADC using
integrated op amp as amplifier
■ 2 GByte (or more) MicroSD Card on SDIO
■ Temperature sensor and RF EEPROM on I2C
compatible serial interface
■ RS-232 interface configurable for
communication or Flash loader
■ IrDA transceiver
■ 4 Kbit serial Flash, 512 K x 16-bit SRAM and
128 Mbit NOR Flash
■ 240x320 TFT color LCD connected to FSMC
interface of STM32L152ZDT6
■ Joystick with 4-direction control and selector
■ Reset and Tamper or key button
■ 4 color user LEDs
■ 3 LEDs for MCU power range indicator
■ MCU consumption measurement circuit
■ 40x8 glass LCD segments connected to LCD
driver of the STM32L152ZDT6
■ Extension connector for daughterboard or
wrapping board
■ MCU voltage; 3.3 V or adjustable 1.65 V-3.6 V
■ USB FS connector
■ Touch slider
■ Light dependent resistor (LDR)
■ ADC/ DAC input signal connector
Data brief − production data
■ MCU integrated op amp configured as Sallen-
Key 2nd order low pass filter
■ MCU integrated op amp configured as amplifier
with adjustable gain
■ Potentiometer
■ JTAG and trace debug support
■ Embedded ST-LINK/V2
Description
The STM32L152D-EVAL evaluation board is a
complete demonstration and development
platform for the STM32 L1 series of ultra-low-
power MCUs and includes an STM32L152ZDT6
ARM Cortex-M3 32-bit microcontroller with
384 KB of Flash memory. An ST-LINK/V2 is
integrated on the board as an embedded in-circuit
debugger / programmer for the STM32L152ZDT6.
The full range of hardware features on the board
helps you develop your own applications and
evaluate all peripherals (USB FS, USART, audio
DAC, microphone ADC, dot-matrix LCD, LCD
glass, IrDA, LDR, SRAM, NOR Flash, MicroSD
Card, temperature sensor and so on).
Extension headers facilitate easy connection of
daughterboard or wrapping board for your
application.
March 2012
Doc ID 022834 Rev 1
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
1/3
www.st.com
3