|
STM32F101X4_10 Datasheet, PDF (1/77 Pages) STMicroelectronics – Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers | |||
|
STM32F101x4
STM32F101x6
Low-density access line, ARM-based 32-bit MCU with
16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces
Features
â Core: ARM 32-bit Cortexâ¢-M3 CPU
â 36 MHz maximum frequency,
1.25 DMIPS/MHz (Dhrystone 2.1)
performance at 0 wait state memory
access
â Single-cycle multiplication and hardware
division
â Memories
â 16 to 32 Kbytes of Flash memory
â 4 to 6 Kbytes of SRAM
â Clock, reset and supply management
â 2.0 to 3.6 V application supply and I/Os
â POR, PDR and programmable voltage
detector (PVD)
â 4-to-16 MHz crystal oscillator
â Internal 8 MHz factory-trimmed RC
â Internal 40 kHz RC
â PLL for CPU clock
â 32 kHz oscillator for RTC with calibration
â Low power
â Sleep, Stop and Standby modes
â VBAT supply for RTC and backup registers
â Debug mode
â Serial wire debug (SWD) and JTAG
interfaces
â DMA
â 7-channel DMA controller
â Peripherals supported: timers, ADC, SPIs,
I2Cs and USARTs
â 1 à 12-bit, 1 µs A/D converter (up to 16
channels)
â Conversion range: 0 to 3.6 V
â Temperature sensor
â Up to 51 fast I/O ports
â 26/37/51 I/Os, all mappable on 16 external
interrupt vectors and almost all 5 V-tolerant
LQFP64
10 x 10 mm
LQFP48
7 x 7 mm
VFQFPN48 VFQFPN36
7 Ã 7 mm
6 Ã 6 mm
â Up to 5 timers
â Up to two16-bit timers, each with up to 4
IC/OC/PWM or pulse counter
â 2 watchdog timers (Independent and
Window)
â SysTick timer: 24-bit downcounter
â Up to 4 communication interfaces
â 1 x I2C interface (SMBus/PMBus)
â Up to 2 USARTs (ISO 7816 interface, LIN,
IrDA capability, modem control)
â 1 Ã SPI (18 Mbit/s)
â CRC calculation unit, 96-bit unique ID
â ECOPACK® packages
Table 1. Device summary
Reference
Part number
STM32F101x4
STM32F101x6
STM32F101C4,
STM32F101R4,
STM32F101T4
STM32F101C6,
STM32F101R6,
STM32F101T6
May 2010
Doc ID 15058 Rev 4
1/77
www.st.com
1
|
▷ |