STM32303C-EVAL Datasheet, PDF (1/3 Pages) STMicroelectronics – STM32303C-EVAL evaluation board

STM32303C-EVAL
STM32303C-EVAL evaluation board
Features
■ Four 5 V power supply options: Power jack,
ST-LINK/V2 USB connector, User USB
connector or daughter board
■ I²S Audio DAC, stereo audio jack which
supports headset with microphone
■ 2-Gbyte or more SPI interface MicroSD card
■ I²C compatible serial interface temperature
sensor, EEPROM and RF EEPROM
■ RS232 communication
■ IrDA transceiver
■ JTAG/SWD and ETM trace debug support,
ST-LINK/V2 embedded
■ 1-Mbit SPI serial Flash memory
■ 240x320 TFT color LCD connected to the SPI
interface
■ Joystick with 4-direction control and selector
■ Reset, Tamper or Key button
■ 4-color user LEDs and high brightness LED
■ Humidity sensor
■ Extension connectors for daughter board or
wrapping board
■ MCU voltage choice: 3.3 V or adjustable
from 2.0 V to 3.6 V
■ USB FS connector
■ Touch-sensing buttons
■ RTC with backup battery
■ CAN2.0A/B compliant connection
■ Light-dependent resistor (LDR)
■ IR receiver
■ Potentiometer
■ 2 motor control connectors
Data brief
Figure 1. STM32303C-EVAL evaluation
board
1. The board figure is not contractual.
Description
The STM32303C-EVAL evaluation board has
been designed as a complete demonstration and
development platform for the ARM cortex-M4
core-based STM32F303VCT6 microcontroller. It
features two I2Cs, three SPIs, five USARTs, one
CAN, four 12-bit ADCs, two 12-bit DACs, internal
40-KByte Data SRAM, 8-KByte Program SRAM
and 256-KByte Flash, Touch sensing, USB FS,
JTAG debugging support. This evaluation board
can be used as the reference design for user
application development but it is not considered
as a final application.
September 2012
Doc ID 023582 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3