STM320518-EVAL Datasheet, PDF (1/3 Pages) STMicroelectronics – STM320518-EVAL evaluation board

STM320518-EVAL
STM320518-EVAL evaluation board
Features
■ Three 5 V power supply options:
– Power jack
– ST-LINK/V2 USB connector or daughter
board
■ Audio speaker and microphone connected to
the STM32F051R8T6 DAC and ADC
■ 2Gbyte or more MicroSD card with SPI
interface
■ Temperature sensor and RF EEPROM
accessible through I²C compatible serial
interface
■ RS232 and RS485 communications
■ IrDA transceiver.
■ IR LED and IR receiver.
■ SWD debug support, and embedded ST-
LINK/V2
■ 240x320 TFT color LCD connected to the
STM32F051R8T6 SPI interface
■ Joystick with 4-direction control and selector
■ Reset, tamper and user buttons.
■ 4 color user LEDs
■ Extension connector for daughter board or
wrapping board
■ MCU voltage: fixed to 3.3 V, or adjustable from
2 to 3.6 V
■ Touch slider
■ Light dependent resistor (LDR)
■ Potentiometer
■ Two HDMI connectors with DDC and CEC
■ Motor control connector
■ RoHS compliant board (lead free)
Data brief
Description
The STM320518-EVAL evaluation board is a
complete demonstration and development
platform for the STM32 F0 series entry-level
MCUs. It includes an STM32F051R8T6 ARM
Cortex-M0 32-bit microcontroller with 64KB of
Flash memory.
The board offers are full range of hardware
features to help you evaluate all peripherals
(motor control, RS232, RS485, audio DAC, Touch
slider, microphone ADC, TFT LCD, IrDA, IR LED,
IR receiver, LDR, MicroSD card, CEC on two
HDMI connectors, RF E2PROM & Temperature
sensor… etc.) and develop your own application.
Extension headers allow to easily connect a
daughter board or wrapping board for your
specific application.
An ST-LINK/V2 is integrated on the board as
embedded in-circuit debugger and programmer
for the STM32F051R8T6 MCU.
April 2012
Doc ID 023146 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
3