STM32-EMBPI Datasheet, PDF (1/3 Pages) STMicroelectronics – Embedded Pi, triple-play platform for STM32

STM32-EMBPI/14
Embedded Pi, triple-play platform for STM32,
Raspberry Pi and Arduino™
Data brief
Features
 STM32F103 running at 72 MHz with
128 Kbytes Flash memory and 20 Kbytes RAM
 Form factor compatible with both 5 V and 3V3
Arduino™ shields, selectable with jumpers
 Hundreds of Arduino™ shields available on the
market enhance the control capability of
Embedded Pi and Raspberry Pi, e.g. to control
motor, sensors, etc.
 Direct connection to the Raspberry Pi
 Selection of one of the three modes of
operation with a jumper
 Arduino™ form factor compatible interfaces:
– 1 SPI
– 1 I2C
– 4 PWM
– 1 UART
– 6 analog inputs
 Embedded Pi extended interfaces:
– 1 SPI
– 1 I2C
– 2 PWM
– 1 UART
– 6 analog inputs
– 1 CAN
Description
The Embedded Pi, based on the STM32F103
MCU, is a triple-play platform for Raspberry Pi,
Arduino™ and the STM32 MCU family. Blending
all three communities together, the Embedded Pi
helps you to get the most out of each platform.
The Embedded Pi can operate in 3 modes:
Standalone, ST-Adapter and Raspberry Pi.
In Standalone mode the Embedded Pi acts as a
base platform, the STM32F103 controls the
Arduino™ shields directly.
In ST-Adapter mode the Embedded Pi controls
the Arduino™ shields, and the Raspberry Pi acts
as the GUI or command line console that send
commands and data to, and receives data from,
the Embedded Pi.
In Raspberry Pi mode the Embedded Pi acts as a
hardware connection bridge between the
Raspberry Pi and Arduino™ shields.
For more information, visit
www.element14.com/embedded-pi
October 2013
DocID025287 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com