|
STLC2411 Datasheet, PDF (1/25 Pages) STMicroelectronics – BLUETOOTH BASEBAND | |||
|
STLC2411
1 FEATURES
â Pin to pin compatible with the previous version
STLC2410B
â Ericsson Technology Licensing Baseband Core
(EBC)
â Bluetooth⢠specification compliance: V1.1 and
V1.2
â Point-to-point, point-to-multi-point (up to 7 slaves)
and scatternet capability
â Asynchronous Connection Oriented (logical
transport) link
â Synchronous Connection Oriented (SCO) links: 2
simultaneous SCO channels
â Supports Pitch-Period Error Concealment (PPEC)
â Improves speech quality in the vicinity of in-
terference
â Improves coexistence with WLAN
â Works at receiver, no Bluetooth implication
â Adaptive Frequency Hopping (AFH): hopping
kernel, channel assessment as Master and as Slave
â Faster Connection: Interlaced scan for Page and
Inquiry scan, first FHS without random backoff,
RSSI used to limit range
â Extended SCO (eSCO) links
â Standard BlueRF bus interface
â QoS Flush
â Clock support
â System clock input:
any integer value from 12 ⦠33 MHz
â LPO clock input at 3.2 and 32 kHz or via the
embedded 32 kHz crystal oscillator cell
â ARM7TDMI 32-bit CPU
â Memory organization
â 64KByte on-chip RAM
â 4KByte on-chip boot ROM
â Programmable external memory interface (EMI)
â Supports byte and half word access
â Supports up to 3 external RAM banks (1
Mbyte/ bank)
â Supports up to 2 Mbyte external flash
memory
â Low power architecture with 2 different low power
levels:
â Sleep Mode
â Deep Sleep Mode
â HW support for packet types
â ACL: DM1, 3, 5 and DH1, 3, 5
â SCO: HV1, 3 and DV
BLUETOOTH⢠BASEBAND
PRELIMINARY DATA
Figure 1. Package
TFBGA132 (8x8x1.2mm)
Table 1. Order Codes
Part Number
STLC2411
Package
TFBGA132
Temp. Range
-40 to +85 °C
â eSCO: EV3, 5
â Communication interfaces
â Synchronous Serial Interface, supporting up
to 32 bit data and different industry standards
â Two enhanced 16550 UARTs with 128 byte
FIFO depth
â 12Mbps USB interface
â Fast master I2C bus interface
â Multi slot PCM interface
â 16 programmable GPIOs
â 2 external interrupts and various interrupt
possibilities through other interfaces
â Ciphering support for up to 128-bit key
â Efficient support for WLAN coexistence in
collocated scenario
â Receiver Signal Strength Indication (RSSI) support
for power-controlled links
â Separate control for external power amplifier (PA)
for class1 power support.
â Software support
â Low level (up to HCI) stack or embedded
stack with profiles
â Support of UART and USB HCI transport layers
â Compliant to automotive specification AEC-Q100
1.1 Applications Features
Typical applications in which the STLC2411 can
be used are:
â Portable computers, PDA
â Modems
â Handheld data transfer devices
â Cameras
â Computer peripherals
â Other type of devices that require the wireless
communication provided by Bluetoothâ¢
â Cable replacement
June 2004
REV. 1
1/25
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
|
▷ |