STHDLS101 Datasheet, PDF (1/25 Pages) STMicroelectronics – AC coupled HDMI level shifter

STHDLS101
AC coupled HDMI level shifter
Features
■ Converts low-swing alternating current (AC)
coupled differential input to high-definition
multimedia interface (HDMI) rev 1.3 compliant
■ HDMI level shifting operation up to 2.7 Gbps
per lane
■ Integrated 50 Ω termination resistors for
AC-coupled differential inputs
■ Input/output transition minimized differential
signaling (TMDS) enable/disable
■ Output slew rate control on TMDS outputs to
minimize electromagnetic interference (EMI)
■ Fail-safe outputs for backdrive protection
■ No re-timing or configuration required
■ Inter-pair output skew < 250 ps
■ Intra-pair output skew < 10 ps
■ Single power supply of 3.3 V
■ ESD protection: ±6 KV HBM on all I/O pins
■ Integrated display data channel (DDC) level
shifters. Pass-gate voltage limiters allow 3.3 V
termination on graphics and memory controller
hub (GMCH) pins and 5 V DDC termination on
HDMI connector pins
■ Hot-plug detect (HPD) signal level shifter from
HDMI/DVI connector
■ Integrated pull-down resistor on HPD_SINK
and OE_N inputs
Applications
■ Notebooks
■ PC motherboards and graphic cards
■ Dongles/cable adapters
QFN-48
(7 x 7 mm)
Description
The STHDLS101 is a high-speed high-definition
multimedia interface (HDMI) level shifter that
converts low-swing AC coupled differential input
to HDMI 1.3 compliant open-drain current
steering RX-terminated differential output.
Through the existing PCI-E pins in the graphics
and memory controller hub (GMCH) of PCs or
notebook motherboards, the pixel clock provides
the required bandwidth (1.65 Gbps, 2.25 Gbps)
for the video supporting 720p, 1080i, 1080p with a
total of 36-bit resolution. The HDMI is multiplexed
onto the PCIe pins in the motherboard where the
AC coupled HDMI at 1.2 V is output by GMCH.
The AC coupled HDMI is then level shifter by this
device to 3.3 V DC coupled HDMI output. The
STHDLS101 supports up to 2.7 Gbps, which is
enough for 12 bits of color depth per channel, as
indicated in HDMI rev 1.3. The device operates
from a single 3.3 V supply and is available in a
48-pin QFN package.
Table 1. Device summary
Order code
STHDLS101QTR
Package
QFN-48
Packing
Tape and reel
December 2008
Rev 4
1/25
www.st.com
25