STGIPQ8C60T-HZ Datasheet, PDF (1/25 Pages) STMicroelectronics – Internal bootstrap diode

STGIPQ8C60T-HZ
SLLIMM™ nano - 2^nd series
IPM, 3-phase inverter, 8 A, 600 V short-circuit rugged IGBTs
Datasheet - production data
Applications
• 3-phase inverters for motor drives
• Home appliances such as dishwashers,
refrigerator compressors, heating systems, air-
conditioning fans, draining and recirculation
pumps
N2DIP-26L type Z
Features
• IPM 8 A, 600 V 3-phase IGBT inverter bridge
including 3 control ICs for gates driving and
freewheeling diodes
• 3.3 V, 5 V and 15 V TTL/CMOS inputs
comparators with hysteresis and pull down/pull
up resistors
• Internal bootstrap diode
• Optimized for low electromagnetic interference
• Undervoltage lockout
• Short-circuit rugged TFS IGBTs
• Smart shutdown function
• Interlocking function
• Op-amp for advanced current sensing
• Comparator for fault protection against
overcurrent
• NTC (UL 1434 CA 2 and 4)
• Isolation rating of 1500 Vrms/min
Description
This second series of SLLIMM (small low-loss
intelligent molded module) nano provides a
compact, high performance AC motor drive in a
simple, rugged design. It is composed of six
improved short-circuit rugged trench gate field-
stop IGBTs with freewheeling diodes and three
half-bridge HVICs for gate driving, providing low
electromagnetic interference (EMI) characteristics
with optimized switching speed. The package is
designed to allow a better and easy screw on
heatsink, it is optimized for thermal performance
and compactness in built-in motor applications, or
other low power applications where assembly
space is limited. This IPM includes an operational
amplifier, completely uncommitted, and a
comparator that can be used to design a fast and
efficient protection circuit. SLLIMM™ is a
trademark of STMicroelectronics.
Order code
STGIPQ8C60T-HZ
Table 1. Device summary
Marking
Package
GIPQ8C60T-HZ
N2DIP-26L
Packaging
Tube
December 2016
This is information on a product in full production.
DocID028908 Rev 3
1/25
www.st.com