STGIPN3H60T-H Datasheet, PDF (1/26 Pages) STMicroelectronics – Optimized for low electromagnetic interference

STGIPN3H60T-H
SLLIMM™-nano small low-loss intelligent molded module
IPM, 3 A, 600 V, 3-phase IGBT inverter bridge
Datasheet - production data
Applications
 3-phase inverters for motor drives
 Dish washers, refrigerator compressors,
heating systems, air-conditioning fans,
draining and recirculation pumps
Description
Features
 IPM 3 A, 600 V, 3-phase IGBT inverter
bridge including control ICs for gate driving
and freewheeling diodes
 Optimized for low electromagnetic
interference
 VCE(sat) negative temperature coefficient
 3.3 V, 5 V, 15 V CMOS/TTL input
comparators with hysteresis and pull-
down/pull-up resistors
 Undervoltage lockout
 Internal bootstrap diode
 Interlocking function
 Smart shutdown function
 Comparator for fault protection against
overtemperature and overcurrent
 Op-amp for advanced current sensing
 Optimized pinout for board layout
 NTC for temperature control
(UL 1434 CA 2 and 4)
This SLLIMM (small low-loss intelligent molded
module) nano provides a compact, high
performance AC motor drive in a simple, rugged
design. It is composed of six MOSFETs and three
half-bridge HVICs for gate driving, providing low
electromagnetic interference (EMI) characteristics
with optimized switching speed. The package is
optimized for thermal performance and
compactness in built-in motor applications, or
other low power applications where assembly
space is limited. This IPM includes an operational
amplifier, completely uncommitted, and a
comparator that can be used to design a fast and
efficient protection circuit. SLLIMM™ is a
trademark of STMicroelectronics.
Table 1: Device summary
Order code
Marking
Package
Packing
STGIPN3H60T-H
GIPN3H60T-H
NDIP-26L
Tube
March 2017
DocID025716 Rev 7
This is information on a product in full production.
1/26
www.st.com