STGIPN3H60 Datasheet, PDF (1/21 Pages) STMicroelectronics – SLLIMM™-nano (small low-loss intelligent molded module)IPM

STGIPN3H60
SLLIMM™-nano (small low-loss intelligent molded module)
IPM, 3 A - 600 V 3-phase IGBT inverter bridge
Datasheet − production data
Features
■ IPM 3 A, 600 V, 3-phase IGBT inverter bridge
including control ICs for gate driving and
freewheeling diodes
■ Optimized for low electromagnetic interference
■ V_CE(sat) negative temperature coefficient
■ 3.3 V, 5 V, 15 V CMOS/TTL inputs
comparators with hysteresis and pull down/pull
up resistors
■ Undervoltage lockout
■ Internal bootstrap diode
■ Interlocking function
■ Smart shutdown function
■ Comparator for fault protection against
overtemperature and overcurrent
■ Op amp for advanced current sensing
■ Optimized pinout for easy board layout
Applications
■ 3-phase inverters for motor drives
■ Dish washers, refrigerator compressors,
heating systems, air-conditioning fans,
draining and recirculation pumps
NDIP-26L
Description
This intelligent power module implements a
compact, high performance AC motor drive in a
simple, rugged design. It is composed of six
IGBTs with freewheeling diodes and three half-
bridge HVICs for gate driving, providing low
electromagnetic interference (EMI) characteristics
with optimized switching speed. The package is
optimized for thermal performance and
compactness in built-in motor applications, or
other low power applications where assembly
space is limited. This IPM includes an operational
amplifier, completely uncommitted, and a
comparator that can be used to design a fast and
efficient protection circuit. SLLIMM™ is a
trademark of STMicroelectronics.
Table 1. Device summary
Order code
STGIPN3H60
Marking
GIPN3H60
Package
NDIP-26L
May 2012
This is information on a product in full production.
Doc ID 018957 Rev 3
Packaging
Tube
1/21
www.st.com
21