STG4160 Datasheet, PDF (1/19 Pages) STMicroelectronics – Low voltage 0.5 single SPDT switch with break-before-make feature and 15 kV contact ESD protection

STG4160
Low voltage 0.5  single SPDT switch with break-before-make
feature and 15 kV contact ESD protection
Datasheet - production data
Applications
 Mobile phones
Flip Chip 8
Features
 Wide operating voltage range:
V_CC (opr.) = 1.65 to 4.8 V
 Low power dissipation:
I_CC = 0.2 µA (max.) at T_A = 85 °C
 Low on-resistance:
– R_ON = 0.75  (T_A = 25 °C)
at V_CC = 2.25 V
– R_ON = 0.50  (T_A = 25 °C) at V_CC = 3.0 V
– R_ON = 0.40  (T_A = 25 °C) at V_CC = 4.3 V
 Separate supply voltage for switch and control
pins
 Latch-up performance exceeds 100 mA per
JESD 78, Class II
 ESD performance tested on common pin
(D pin):
– 15 kV IEC 61000-4-2 ESD, contact
discharge
– 8 kV HBM JESD22 A114-B Class II
 ESD performance tested on S1 and S2 pin:
8 kV IEC 61000-4-2 ESD, contact discharge
 ESD performance test on all other pins:
– 4 kV HBM (JESD22 A114-B Class II)
– 400 V machine model (JESD22 A115-A)
– 1500 V charged-device model
(JESD22 C101)
Description
The STG4160 device is a high-speed CMOS low
voltage single analog SPDT (single pole dual
throw) switch or 2:1 multiplexer/demultiplexer
switch fabricated in silicon gate C²MOS
technology. It is designed to operate from 1.65 to
4.8 V, making this device ideal for portable
applications. It offers low on-resistance (0.40 
typ.) at V_CC = 4.3 V. The SEL inputs are provided
to control the switches.
The switch S1 is ON (connected to the common
port D) when the SEL input is held high and OFF
(high impedance state exists between the two
ports) when the SEL is held low. The switch S2 is
ON (connected to the common port D) when the
SEL input is held low and OFF (high impedance
state exist between the two ports) when the SEL
is held high.
Additional key features are fast switching speed,
break-before-make delay time and ultra power
consumption. All inputs and outputs are equipped
with protection circuits against static discharge,
giving them ESD immunity and transient excess
voltage.
Table 1. Device summary
Order code
Package
Packing
STG4160BJR
Flip Chip 8
Tape and reel
May 2013
This is information on a product in full production.
DocID15013 Rev 3
1/19
www.st.com
19