STG3692 Datasheet, PDF (1/18 Pages) STMicroelectronics – Low voltage high bandwidth quad SPDT switch

STG3692
Low voltage high bandwidth quad SPDT switch
Features
■ Ultra low power dissipation:
– I_CC = 0.2µA (Max.) at T_A = 85°C
■ Low “ON” resistance:
– R_ON = 4.6Ω (T_A = 25°C) at V_CC = 4.3V
– R_ON = 5.8Ω (T_A = 25°C) at V_CC = 3.0V
■ Wide operating voltage range:
– V_CC (Opr) = 1.65V to 4.3V single supply
■ 4.3V tolerant and 1.8V compatible threshold on
digital control input at V_CC = 2.3V to 3.0V
■ Typical bandwidth (-3dB) at 800MHz on all
channels
■ Latch-up performance exceeds 100mA per
JESD 78, Class II
■ ESD performance exceeds JESD22
– 2000-V Human body model (A114-A)
■ USB (2.0) High speed (480Mbps) signal
switching compliant
QFN16L (2.6mm x 1.8mm)
Description
The STG3692 is a high-speed CMOS low voltage
quad analog S.P.D.T. (Single Pole Dual Throw)
Switch or 2:1 Multiplexer /Demultiplexer Switch
fabricated in silicon gate C²MOS technology. It is
designed to operate from 1.65V to 4.3V, making
this device ideal for portable applications.
The nSEL inputs are provided to control the
switch. The switch S1 is ON (they are connected
to common Ports Dn) when the nSEL input is held
high and OFF (high impedance state exists
between the two ports) when SEL is held low; the
switch S2 is ON (it is connected to common Port
D) when the nSEL input is held low and OFF (high
impedance state exists between the two ports)
when nSEL is held high.
Additional key features are fast switching speed,
Break Before Make Delay Time and Ultra Low
Power Consumption. All inputs and outputs are
equipped with protection circuits against static
discharge, giving them ESD immunity and
transient excess voltage.
Table 1. Device summary
Order code
STG3692QTR
Package
QFN16L (2.6mm x 1.8mm)
Packaging
Tape and reel
July 2007
Rev 4
1/18
www.st.com
18