STG3384 Datasheet, PDF (1/12 Pages) STMicroelectronics – Low voltage 0.9Ω max dual SPST switch with break before make feature

STG3384
Low voltage 0.9Ω max dual SPST switch
with break before make feature
Features
■ Low quiescent supply current:
Max ± 50µA for V_1IN, V_2IN = 1.80V at
V_CC = 4.3V
■ Ultra low power dissipation:
I_CC = 0.2µA (Max) at T_A = 85°C, V_IN = 0V
■ Switch: low "ON" resistance:
– R_ON = 0.7Ω (Max T_A = 25°C) at V_CC = 4.3V
– R_ON = 0.7Ω (Max T_A = 25°C) at V_CC = 3V
■ Wide operating voltage range:
V_CC (OPR) = 1.65V to 4.3V single supply
■ 4.3V tolerant and 1.8V compatible threshold on
digital control input at V_CC = 1.65 to 4.3V
■ Latch-up performance exceeds 300mA
(JESD 17)
■ ESD performance (analog channel vs GND):
HBM > 2kV (MIL STD 883 method 3015)
TDFN10
Description
The STG3384 is a high-speed CMOS low voltage
dual analog S.P.S.T. (Single Pole Single Throw)
SWITCH fabricated in silicon gate C²MOS
technology. It is designed to operate from 1.65V
to 4.3V, making this device ideal for portable.
The nIN inputs are provided to control the
switches.
The switches Sn are ON (they are connected to
common Ports Dn) when the nIN input is held
high and OFF (high impedance state exists
between the two ports) when nIN is held low.
Additional key features are fast switching speed,
and Ultra Low Power Consumption. All inputs and
outputs are equipped with protection circuits
against static discharge, giving them ESD
immunity and transient excess voltage.
Order codes
Part number
STG3384DTR
August 2006
Package
TDFN10 (2.5mm x 1.3mm)
Rev 1
Packaging
Tape and reel
1/12
www.st.com
12