STEVAL-PCC010V2 Datasheet, PDF (1/7 Pages) STMicroelectronics – Ethernet with ST802RT1A and STM32F207 demonstration board

STEVAL-PCC010V2
Ethernet with ST802RT1A and STM32F207
demonstration board
Data brief
Features
ST802RT1A Ethernet PHY demonstration board:
■ ST802RT1A Fast Ethernet physical layer
transceiver
■ Onboard 3.3 V LDO regulator
■ Onboard 25 MHz crystal
■ 12 jumpers for boot-strap configuration (MII
address, auto-negotiation, loopback, power
down, and MII/RMII configuration)
■ Several GND test points and jumpers for power
consumption measurement
■ Connectors
– 20-pin full pitch header connector for debug
purposes (compatible with the STM32F207
controller board)
– RJ45 connector with embedded
transformer
– 40-pin connector footprint compatible with
the spirent communications SmartBits
200/2000 (SMB-200/ SMB-2000) analysis
system (connector is not assembled)
STM32F207 controller demonstration board:
■ STM32F207 Connectivity Line Cortex-m3
based microcontroller with embedded Ethernet
MAC
■ Onboard 3.3 V LDO regulator
■ Onboard 25 MHz crystal
■ Reset button, power LED, general-purpose
button, and two LEDs
■ Connectors:
– 20-pin full pitch header connector for debug
purposes and compatibility with the
ST802RT1A demonstration board
– 20-pin JTAG connector
– Additional general purpose 20-pin full pitch
header connector
– USB device connector (+5 V0 Power
supply)
STEVAL-PCC010V2
■ RoHS compliant
Description
The STEVAL-PCC010V2 demonstration board is
an evolution of the STEVAL-PCC010V1 and was
designed to allow evaluation of the ST802RT1A,
Fast Ethernet physical layer (PHY) interface
supporting 100BASE-TX and 10BASE-T
applications.
The PHY provides a media independent interface
(MII) and reduced media independent interface
(RMII) for easy attachment to a 10/100 media
access controllers (MAC).
Many jumpers, test points, and connectors on the
demonstration board enable to test the features
provided by the ST802RT1A Ethernet PHY. An
additional header connector allows connection to
the STM32F207 controller demonstration board
for an immediate evaluation of the complete
application – microcontroller and the physical
layer.
The controller board is pre-flashed with a web
server demo.
The STM32F207 controller demonstration board
is part of the STEVAL-PCC010V2 package
delivery.
February 2011
Doc ID 18403 Rev 1
For further information contact your local STMicroelectronics sales office.
1/7
www.st.com
7