STEVAL-PCC009V2 Datasheet, PDF (1/7 Pages) STMicroelectronics – IBU universal interface based on the STM32x

STEVAL-PCC009V2
IBU universal interface based on the STM32x
Data brief
Features
■ Supports two modes:
– application mode: the PC GUI allows SPI,
I²C and UART interfacing and control of the
communication parameters
– DFU mode: allows the user to change the
firmware if required to suit specific
applications
■ Board power supplied through a USB Mini B-
type connector
■ DLL files provided to allow users to create a
customized PC GUI
■ RoHS compliant
STEVAL-PCC009V2
Description
The STEVAL-PCC009V2 board implements an
IBU universal interface (IBUUI), which is an
STM32x-based USB-to-serial interface bridge
consisting of a configurable 10-pin interface and a
30-pin interface.
The STM32x microcontroller is used as an
interface between the PC and another end
system. Various communication peripherals are
multiplexed with GPIOs, ADC and PWM channels
in both the 10-pin and 30-pin interfaces.
With these interfaces, there is a provision to
connect a device which can communicate using
I²C, SPI and UART. Thus, the IBUUI tool allows
users to connect a serial communication-based
device to a PC. At the same time, it allows user
control of some GPIOs available in 10-pin and 30-
pin interfaces, and sets them to input/output mode
as per application requirements.
June 2010
Doc ID 17629 Rev 1
For further information contact your local STMicroelectronics sales office.
1/7
www.st.com
7