STEVAL-MKI126V3 Datasheet, PDF (1/9 Pages) STMicroelectronics – STSmartVoice demonstration board

STEVAL-MKI126V3
STSmartVoice demonstration board
Features
■ 2 on-board MEMS MP34DT01 microphones on
board
■ Capable of driving up to 6 digital MEMS
microphones
■ 3 independent I²S outputs
■ Up to 10 independent 32-bit user
programmable biquads per channel
■ The demonstration board is fully configurable
with:
– STEVAL-MKI129V1/V2/V3
– STEVAL-MKI131V1/V2/V3
– STEVAL-MKI116V1
– STEVAL-MKI117V1/V2
– STEVAL-CCA035V1
■ Controllable via APWorkbench software suite
■ RoHS compliant
Description
The STEVAL-MKI126V3 demonstration board
allows the connection of up to six microphones
using the sockets provided, or through the
connection of a dedicated six-microphone array.
The digital interface of the board allows the
interfacing of the MIC output to the most widely
used audio receivers and digital amplifiers, or
permits evaluation of the MIC with generic audio
measurement equipment. The filtered PWM
signals allow the connection of a headset to listen
to audio received through the microphones.
The fully digital path ensures a high level of
processing with sound preconditioning, filtering
and voice enhancement.
The main function of the STEVAL-MKI126V3 is to
convert the PDM signals from the microphones
into more common I²S and PWM signals.
Data brief
The I²S signal is routed both on a general and
interface connector. appropriately filtered PWM
signals provide an analog interface.
The STEVAL-MKI126V3 is equipped with two
MP34DT01 microphones and an STA321MPL
scalable digital microphone processor.
September 2012
Doc ID 023685 Rev 1
For further information contact your local STMicroelectronics sales office.
1/9
www.st.com
9