|
STEVAL-MKI117V1 Datasheet, PDF (1/5 Pages) STMicroelectronics – MEMS microphone demonstration board based on the MP34DT01 and STM32 | |||
|
STEVAL-MKI117V1
MEMS microphone demonstration board
based on the MP34DT01 and STM32
Data brief
Features
â Powered and connected to PC through USB
â Sound card automatically recognized by the
PC as an audio device
â The onboard microphones are digital MEMS
devices
â MEMS microphones provide a high frequency
data stream (1 to 3.25 MHz) of 1-bit digital
samples (PDM technique)
â Audio collected from the microphones is sent to
the PC through the USB
â LED status indicator
â RoHS compliant
Description
The purpose of the STEVAL-MKI117V1
demonstration board is to provide an example of
the decoding and streaming of digital MEMS
microphone outputs.
The STEVAL-MKI117V1 demonstration board
hosts the MP34DT01 (bottom-port digital
microphone), working as a sensor, and the
STM32F107RC microcontroller, working as an
audio decoder.
These microphones are analog-to-digital
transducers. They are able to sense sound
pressure and convert this signal into a digital
signal using the PDM technique.
The STM32 microcontroller decodes the PDM
signal coming from the microphones and streams
the audio via the USB.
The STEVAL-MKI117V1 demonstration board is a
sound card automatically recognized by the PC
as an audio device. Connection is made through a
USB cable which also supplies the board and
then streams the collected audio.
March 2012
Doc ID 023000 Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5
|
▷ |