STEVAL-MKI080V1 Datasheet, PDF (1/5 Pages) STMicroelectronics – MEMS demonstration board based on the LPR410AL analog output 2-axis gyroscope

STEVAL-MKI080V1
MEMS demonstration board based on the LPR410AL
analog output 2-axis gyroscope
Data brief
Features
■ Two different working modes:
– analog (AWM)
– digital (DWM)
■ RoHS compliant
Description
The STEVAL-MKI080V1 demonstration board is
designed to provide the user with a complete,
ready-to-use platform for demonstration of the
LPR410AL product family.
The STEVAL-MKI080V1 includes a sensing
element and an IC interface capable of translating
information from the sensing element into a
measured signal that can be used for external
applications.
In addition to the MEMS sensor, the
demonstration board uses an ST7 microcontroller
which functions as a bridge between the sensor
and the PC. This makes it possible to download
the graphical user interface (GUI) from the
website or to use dedicated software routines for
customized applications.
The STEVAL-MKI080V1 demonstration board has
been designed for use in two different working
modes: analog and digital.
In analog mode (AWM) the microcontroller is
disabled and the analog outputs of the device are
available to the user on a dedicated connector.
This is the default working mode when power is
supplied through either the USB connector or the
supply connector.
In digital mode (DWM) the microcontroller is
enabled and allows the user to digitally acquire
the output signals of the device, to view them on
the PC through the dedicated GUI, and to
manage the control pins of the device.
STEVAL-MKI080V1
March 2011
Doc ID 018524 Rev 1
For further information contact your local STMicroelectronics sales office.
1/5
www.st.com
5