|
STEVAL-ISA135V1 Datasheet, PDF (1/4 Pages) STMicroelectronics – Thermal shutdown with hysteresis | |||
|
STEVAL-ISA135V1
4 W, 12 V output, isolated flyback converter using VIPer⢠Plus -
VIPER06HS
Data brief
Description
The STEVAL-ISA135V1 is a 12 V - 4 W power
supply in isolated flyback topology based on the
VIPer06HS, a new offline high voltage converter
having, as main features: 800 V avalanche
rugged power section, PWM operation at 115
kHz with frequency jittering for lower EMI, cycle-
by-cycle current limit with adjustable set point,
on-board soft-start and safe auto-restart after a
fault condition.
Features
⢠AC main input voltage: VIN 85 VAC - 265 VAC
⢠Main frequency: fL 50 Hz - 60 Hz
⢠Output voltage: VOUT 12 V
⢠Max output current: IOUT 333 mA
⢠Precision of output regulation:
ÎVOUT_LF ±5 %
⢠High frequency output voltage ripple:
ÎVOUT_HF 50 mV
⢠Min active mode efficiency: ηAV 71 %
⢠Max ambient operating temperature:
TAMB 60 ºC
⢠Thermal shutdown with hysteresis
⢠Delayed overload protection
⢠Open loop failure protection (if auxiliary
winding is used)
⢠RoHS compliant
May 2014
DocID025243 Rev 2
For further information contact your local STMicroelectronics sales
office
1/4
www.st.com
|
▷ |