|
STEVAL-IPE004V1 Datasheet, PDF (1/4 Pages) STMicroelectronics – Electricity Meter (mono phase) - Measurement Board 1 Shunt | |||
|
STEVAL-IPE004V1
Features
Electricity Meter (mono phase) - Measurement Board
1 Shunt
Data Brief
â Single-phase, 0.5 class accuracy guaranteed
â UNOM(RMS) = 140 to 300V,
INOM/IMAX(RMS) = 2/20A, fLIN = 45 to 65Hz,
TAMB = -40 to +85 °C
â LED checking for:
â Functioning
â No Load Condition
â Reverse Energy Direction
â Stepper Motor Display Connector
â Capacitive Power Supply
â SPI Interface Connector:
â Active, Reactive Apparent Power
consumption
â VRMS, IRMS and Line Frequency
â Status
STEVAL-IPE004V1
Applications
This metering module can be used to build a
Class 0.5 Single-phase standalone or
microprocessor based meter with or without
Tamper detection for power line systems of
UNOM = 140 to 300VRMS, INOM/IMAX = 2/20ARMS,
fLIN = 45 to 65Hz and TAMB = -40 to +85 °C.
In standalone mode, a stepper motor display
should be connected to pins W5 and W6. A user
can select the type of stepper or the constant of
output pulse frequency by changing LVS or KMOT
configurators respectively.
In Microprocessor based mode, a control board
with a microprocessor should be connected to the
male connector P1 of the module using a 10-wire
flat cable.
January 2006
For further information contact your local STMicroelectronics sales office
Rev 1
1/4
www.st.com
4
|
▷ |